African American DNA Research Forum
Re: Testing on Your Own
In Response To: Re: Testing on Your Own ()
You may have your macro security set too high. Try this: Go to Tools>Options>Security and then click on the Macro Security button at the bottom. Set your security level to medium. I had the same problem,but when I did this I was able to get it to work.
Also, remember if you use all of the STR profile numbers you will get different results than if you only use the green cells ( the entire map is not used). This is why I only entered the appropriate numbers into the green cells in order to cover the entire map. After you've done this you might then want to try splitting the numbers such as what I described to Sasa and try printing the two maps and comparing, but again, only put the appropriate numbers into the green cells.
Messages In This Thread